myCNC-ET6 is an Ethernet CNC controller with 6 motor outputs and a built-in DC-DC converter, designed to pair with an Odroid or Raspberry Pi computer board to build a complete, compact CNC control kit. It is the simplest board in the myCNC controller lineup, with no built-in closed-loop motion control or torch height control.
Ethernet CNC controller myCNC-ET6
– 9 years ago. Hot Hits: 16994
myCNC-ET6 controller board
myCNC-ET6 controller specification
| Number motor outputs | 6 |
|---|---|
| Motor driver outputs | pulse-dir, differential line driver outputs compatible with EIA RS-422 Standard |
| Maximum pulse frequency | 3 MHz |
| Inputs | 8x galvanic isolation, PNP/NPN sensors compatible |
| Outputs | 2x – relays 10A, NO/NC contacts 2x – open collector, 24V, 0.25A |
| PWM outputs | 3x – open collector, 24V, 0.25A, |
| DAC output | 1x – 0…10V (for spindle speed control and relative applications) |
| RS485/RS422 | 1x RS485 half-duplex serial communication, Modbus ASCII/RTU |
| Power supply outputs for control computer | 2x DC-DC converters 5V 1.5A |
We moved connectors description to our Wiki
myCNC-ET6 board contains built-in DC-DC converter and mounting holes to install and power-up Odroid/Raspberry computer board. Standard monitor with HDMI can be connected to Odroid-C2 computer board. Screen resolution up to 1920×1080 (Full HD) supported. Fully functional Ubuntu 16.04 Linux and myCNC control software installed on the computer. NC code files can be uploaded to the computer through Wifi (Samba Server, FTP Server installed on the computer) or USB disks.
We can offer affordable 10″ or 15.6″ screen with resistive touch to build a complete stand-alone CNC control kit.